Electronics

  Replacement TK 7.1 Multifunction Unit (MFU) for your Heng Long 1/16 RC Tank. TK7.1 Features: Servo support for barrel elevation and barrel recoil Servo support for 360 degree periscope Servo signal support for warning/flashing lights mode Elevation & Recoil servo reverse switch Elevation Servo angle setting 2S-3S 7.4-11.1V LiPo...

  Replacement TK 7.1 Multifunction Unit (MFU) for your Heng Long 1/16 RC Tank. TK7.1 Features: Servo support for barrel elevation and barrel recoil Servo support for 360 degree periscope Servo signal support for warning/flashing lights mode Elevation & Recoil servo reverse switch Elevation Servo angle setting 2S-3S 7.4-11.1V LiPo...

Replacement Heng Long TK7.0 (or Version 7) Multi Function Main board 2.4GHz for 1/16 RC Tank. Includes:1 x TK7.0 MFU(Russian T90 and Tiger I sounds) This board will NOT work with your TK6.0/s or TK6.1/s series radio. You will need to purchase the Version 7.0 radio seperately. 

Replacement Heng Long TK7.0 (or Version 7) Multi Function Main board 2.4GHz for 1/16 RC Tank. Includes:1 x TK7.0 MFU(M1A2 Abrams & Leopard 2A6 sounds) This board will NOT work with your TK6.0/s or TK6.1/s series radio. You will need to purchase the Version 7.0 radio seperately. 

35mm full range 8 ohm speaker with enclosure for your 1/16 Heng Long, Mato or Taigen RC Tank. Ideal for the smaller tanks where space can be limiting. Includes:1 x Speaker with 2pin connector Dimensions: L:58mm x W:44mm x H:23mm

Replacement smoke generator unit for your Heng Long 1/16 TK6.0s or TK6.1s or TK7.0 or TK7.1 equipped RC tank.Also compatible with ElMod FUSION ECO/PRO (Rev. F only) boards.  will NOT work with Heng Long v5.3 MFU or older. Includes:1 x Smoke Unit (fluid tank may vary in colour)2 x connection...

Replacement BB motor unit for your 1/16 scale TK6 series or TK7.0 or TK7.1 Heng Long RC tank. Includes:1 x BB Firing Motor unit with 2pin trigger (CN6) and 2pin motor wires (CN10)

Replacement turret rotation/traverse motor unit for your 1/16 Heng Long RC TanksFor use with v5.3 and newer TK6 series Includes:1 x rotation/traverse unit with cable and plug

Replacement USB battery charger to suit the 7.4V Li-Ion battery packs supplied with v6 series or newer Heng Long 1/16 scale RC Tanks. Includes:1 x USB Charger

Heng Long battle unit for use with the 6 series and newer MFUs. Suitable for the following Heng Long Multifunction boards: TK6.0, TK6.0S | TK6.1, TK6.1S | TK7.0 Includes:IR Receiver Unit with wire and magnetic base

Mato branded Cannon/Barrel smoker unit for your TK6.0s or TK6.1s or TK7.0/TK7.1 series equipped Heng Long 1/16 RC Tank. Installation notes: Replaces the BB Unit in your tank - You will no longer be able to use the BB function in your tank if you wish to fit this barrel smoker. Includes:1...

This XT60 Male To Deans T Plug Female Adapter allows you to connect your XT60 battery pack to your TK6.1/s and TK7.1 Multifunction Board. Includes:1 x XT60 Male To Deans T Plug Female Adapter

Never be confused about which packs are fully charged again. These handy little charged/discharged coloured indicator caps are easily fitted to the XT60 battery connector. These caps also provide additional piece of mind by further reducing the chance an electrical short circuit whilst in transit or storage.  Included:2 x Red...

Replacement Standard 3mm LED Pair RED for RC Tank Rear Lights. Suit: Heng Long, Taigen, Torro and Tamiya. Includes:Standard 3mm Red Led x 2 Cables NOT included  

This is the wiring kit used to connect your own PWM type receiver to the Taigen V2 or V3 motherboards. This consists of 6 PWM cables and a bind plug for the Taigen motherboard. When the bind plug is inserted the motherboard will use the PWM cables for control. When...

This XT60 male to bullet connector cable allows you to use your Compatible with: TK6.0sTK7.0  Not compatible with TK6.1/s or Tk7.1 boards

Replacment On/Off switch for your Heng Long 1/16 scale RC Tank. Compatible with TK 6 series and TK 7 series multifunction boards Includes:On/Off Switch2pin connector with cable

Heng Long IR Receiver Connector With cable for the 6 series and newer MFUs. Suitable for the following Heng Long Multifunction boards: TK7.0 Includes:3pin Plug with cabe and connector for TK7.0 Multifunction Boards

Replacment IR Emitter with wires for your Heng Long 1/16 scale RC Tank. Compatible with TK 6 series and early TK 7 series multifunction boards.  Please contact us if you are unsure on the board you have. Includes:1 x IR Emitter

Replacment gearbox cables for your Heng Long 1/16 scale RC Tank. Compatible with TK 6 series and TK 7 series multifunction boards Comptible with:TK6.0 | TK6.0s | TK6.1 | TK6.1sTK7.0 | TK7.1 Includes:2 x Red and Black gearbox cable pairs (for one gearbox)

Replacment battery cable with Tamiya plug for your Heng Long 1/16 scale RC Tank. Compatible with TK 6.0/s series and TK 7.0 series multifunction boards. Includes:1 x battery cable with Tamiya plug

Replacement barrel elevation unit for the Heng Long 1/16 scale Version TK6 Series Tiger I and King Tiger RC tanks. Suits the following tanks: Tiger I - Version 6.0 or newer King Tiger - Version 6.0 or newer T-72 - Version 6.0 or newer Includes:1 x Barrel elevation unit with...

Replacement barrel elevation unit for Heng Long TK 6.0 or newer series 1/16 scale RC tanks. Suits the following tanks: Sturmgeschütze (StuG) III - 3868 Panther G - 3879 M4A3 Sherman - 3898 Colour of unit may vary (grey or white)

Replacement barrel elevation unit for Heng Long 1/16 scale RC tanks.Unit includes 2 pin plug for v5.3 or newer Heng Long MFU Suits the following tanks: Panzer III Panzer IV Jagdpanther KV-1 Type 99/99A T-34  

3 Pin DuPont Style Cable for TK6.1/s And TK7.1 multifunction boards. For use with the CH1 to CH6 and CH13/CH16 Includes: 1 x 3pin DuPont Connector with cable

Replacement 2-pin DuPont-style connector with red/white cable. Used for CN15 port (IR Emitter) on the Heng Long TK6.1/s series and TK7.1 series multifunction boards for RC Tanks. Can also be used as LED 1-8 on all TK6 or newer boards. Includes:1 x 2pin DuPont-style connector with red/white cable  

Replacement 2-pin DuPont-style connector with wires for LED1-LED8 ports on the Heng Long TK 6 series and TK 7 series multifunction boards for RC Tanks. Includes:2 x 2pin DuPont-style connector with wires

Replacement 2-pin DuPont-style connectors for LED1-LED8 ports on the Heng Long TK6.0/s, TK6.1/s and TK7.0 multifunction boards for RC Tanks. Includes:1 x 2pin DuPont-style connector housing2 x Female Crimp Pins

Tidy up the wiring inside your tank with these cable zip ties. Includes:10 x Cable Zip Tie - Size: 98mm x 2.5mm(Natural Colour)

Replacement 5mm White emitting LED with clear lens.Suit Heng Long, Taigen, Torro and some Tamiya applications. Features: Viewing Angle: 30° Intensity: 4000mcd Typical Forward Voltage: 3.2VDC Typical Forward CUrrent: 20mA  

5MM EMITTING DIODE with blue transparent lens. Suitable replacement for Clark IR010 diode. Features: Viewing Angle: 30° Peak Spectral Wavelength(IR): 940nm @ 20mA  Spectral Bandwidth (DI): 50nm@20mA  

Cooling fan for your Heng Long TK6.0/s, TK6.1/s, and TK7.0 series boards. Features: Color: black Noise level: 22 dB Fan dimension: 40 x 40 x 10 mm 2pin connector Rated Voltage: 12VDC,0.1A Fan Speed: 3000RPM(+/-10%) Weight:30G Please note: Fan plugs into CN2 on the TK6.0, TK6.1, TK7.0 and TK7.1 MFUs  

Cannon/Barrel smoker unit with muzzle flash LED for your TK6.0s or TK6.1s or TK7.0 series equipped Heng Long 1/16 RC Tank. Features an aluminium resevoir and flexible silicone tubing. Installation notes: Replaces the BB Unit in your tank - You will no longer be able to use the BB function in...

8 cm (3.3") fullrange speaker with good bass reproduction, balanced frequency response and high efficiency. Ideal for larger tanks with the extra space in the lower hull.   Technical Data: Rated power 10 W Maximum power 15 W Nominal impedance Z 8 Ohm Frequency response 130–20000 Hz Mean sound pressure level...

Legacy Product for older (pre TK6 series) Heng Long RC Tanks 8-Pin and 2-Pin Plus 5-Pin Connector With Wire for the Heng Long Multifunction unit (version 5.3 or older). Also compatible with the Taigen V1, V2 and V3 series MFU. Includes:1 x 8pin to 5pin/2pin Cable 

Legacy Product for older (pre TK6 series) Heng Long RC Tanks Replacement turret connector for your Heng Long 1/16 scale RC Tank v5.3 MFU 1 x 8 pin port3 x 2 pin port1 x 3 pin port

This is the cable used for infrared battling Taigen RC Tanks. It has a 5 pin JST-XH plug on one end for connecting to the Taigen or Heng Long motherboard, and a 3 pin JST-XH for the infrared receiver and infrared LED emitter on the other end. This cable is...

Replacment On/Off switch set for your Heng Long or Taigen RC Tank. Includes: On/Off Switch2pin cable w/connector2pin cable with Tamiya Plug Please note: NOT compatible with the Heng Long TK6.0/6.1 or newer MFU electrics

LIMITED NEW OLD STOCK J15 Revolving LED Light for the Tamiya 56019 and 56020 1/16 scale Leopard 2A6 full option kits. Includes: 1 x J15 LED Light